===============
1. CD contents
===============

    a. Directory of DVCAM
    b. Directory of VideoWave III

=======================
2. System Requirements
=======================

    a. 266 MHz Pentium II (equivalent or higher)
    b. 64 MB of RAM
    c. 45 MB of free hard drive space for program
    d. 1 GB of free hard drive space for video editing
    e. Video card with 4 MB RAM, minimum 800*600 resolution at 16-bit hi-color 
       (65,536 colors); Direct Draw Drivers recommended
    f. 16-bit stereo sound card and speakers
    g. Analog capture card (required for analog video capture)

=======================================================
3. Minimum Recommended System for DV and MPEG-2 Editing
=======================================================

    a. 350 MHz Pentium II (or equivalent)
    b. 128 MB of RAM
    c. 45 MB of free hard drive space for program
    d. 6 GB of free hard drive space for video editing, (Ultra DMA, SCSI-2 sub-system
       recommended)
    e. Video card with 4 MB RAM, minimum 800*600 resolution at 16-bit hi-color
       (65,536 colors); Direct Draw Drivers recommended
    f. 16-bit stereo sound card and speakers
    g. CD-ROM or DVD-ROM drive
    h. An OHCI Compliant IEEE-1394 card (required for digital video capture)

=================================
4. Operation System Requirements
=================================

    a. Windows 98 (Gold Version)
    b. Windows 98 SE (Second Edition)

==========================================================================
5. How to distinguish Windows 98 gold version from Windows 98 SE version?
==========================================================================
 
    Following the 3 methods, then you will find the version of your operating system:
      a. {Start} -> {Settings} -> {Control Panel} -> {System} -> {General}
      b. {My Computer} -> {Control Panel} -> {System} -> {General}
      c. {My Computer} (Push the right button of mouse and choose the Properties)
      d. Windows 98 Gold version: 
                     System:
                         Microsoft Windows 98
                         4.10.1998
      e. Windows 98 SE version:
                     System:
                         Microsoft Windows 98
                         Second Edition
                         4.10.2222A

=====================
6. Installation Step
=====================

    a. Confirm which version of Windows 98.
    b. Turn off the PC.
    c. Plug the 1394 card into the appropriate PCI slot.
    d. Power on the PC.
    e. The system will find the undefined hardware, and dialog box for installation of the
       driver.
    f. Please put the CD into the CD-ROM drive and complete the installation of the driver.
    g. Click the {Start} button, and choose the {Run¡K}, Select the CD-ROM drive and 
       proceed to install the DVCAM.

===========================================================
7. How to install DVCAM? (Windows 98gold and Windows 98SE)
===========================================================

    a. Change the directory to [DVCAM], and choose the appropriate directory, which
       depends on your Windows version.
    b. Run the SETUP.EXE.
    c. It will update the 1394 driver automatically.
    d. After it complete the process, click the following: {Start} -> {Settings} ->
       {Control Panel} -> {System} -> {Device Manager}, in the device listing window, 
       you can find:
       (a). Windows 98 Gold version: 1394 Bus Controller -> PCI OHCI Compliant IEEE
            1394 Host Controller.
       (b). Windows 98 SE: 1394 Bus Controller -> Texas Instrument OHCI Compliant IEEE
            1394 Host Controller.
       (c). It means that you have set up the 1394 driver successfully.

=================================
8. How to install VideoWave III?
=================================

    a. Change the directory to [VIDEOWAVE III], then run the SETUP.EXE.
    b. Complete the dialog box for installation.

======================================================
9. How to make sure the camcorder is connected to PC?
======================================================

    a. After completing the DVCAM and VIDEOWAVE III installation procedures, you have to
       reboot your PC.
    b. Connect your camcorder to PC, and power it on.
    c. Click the following: {Start} -> {Settings} -> {Control Panel} -> {System} ->
       {Device Manager} -> {Sound, Video and Game Controllers}, it will show an item 
       "1394 DV Camcorder".
    d. It means that camcorder is connected to PC successfully.